2. Запишите синонимы к словам: Недалеко, здесь, со всех сторон, туда, далеко.

2. Запишите синонимы к словам: Недалеко, здесь, со всех сторон, туда, далеко.
- Предмет:
  Русский язык
- Автор:
  aránzazu
- 2 года назад

Ответы 2

Ответ:
Недалеко - близко; здесь - тут; со всех сторон - отовсюду; туда - дотуда; далеко - неблизко.
Объяснение:
- Автор:
  jessiepatrick
- 2 года назад
- 12
Ответ: недалеко – рядом, здесь – тут, со всех сторон – везде, туда – там, далеко – за 1000 верст
Объяснение:
- Автор:
  abbeysmith
- 2 года назад
- 10
Добавить свой ответ

Еще вопросы

халява ава508*75858*848858*77585885*859858585858584883*838477*74774858889488585885858848575757848383858857485884838578474885858688585848585884848*747477478+1×6475757588939×7488585848488m×774848
- Предмет:
  Алгебра
- Автор:
  prestonford
- 2 года назад
- Ответов:
  
  1
- Смотреть
Задание 1: Прочитайте текст, поймите его содержание, выполните задания после текста. LATHE A lathe is a machine tool which spins a block of material to perform various operations such as cutting, sanding, drilling, or deformation with tools that are applied to the work piece to create an object which has symmetry about an axis of rotation. Lathes are used in woodturning, metalworking, metal spinning, and glass working. Lathes can be used to shape pottery, the best-known design being the potter's wheel. Most suitably equipped metalworking lathes can also be used to produce plane surfaces and screw threads. The lathe is an ancient tool; it was first developed by the Egyptians around 1300 BC. During the industrial revolution the lathe was motorized, allowing wooden turned items to be created in less time and allowing the working of metal on a lathe. The motor produced a greater rotational speed, makes it easier to quickly produce high quality work. Today most lathes are computer operated al-lowing for mass-production that can be created with accurate precision and without the cost of em-ploying craftsmen. The largest part of the lathe is called the bed on which the headstock and the tailstock are fastened at opposite ends. On the upper part of the bed there are special ways upon which the car-riage and tailstock slide. The two lathe centers are mounted in two spindles: one (the live center) is held in the head-stock spindle while the other (the dead center) - in the tail- stock spindle. The lathe chuck is used for chucking the work that is for clamping it so that it will rotate without wobbling while turning. The chucks usually mounted on the headstock spindle, may have different size and construc¬tions. If the work is perfectly round, it may be chucked in the so-called three-jaw universal chuck all the jaws of which are moved to the center by turning the screw. But if the work is not perfectly round, the four-jaw independent chuck should be used. In turning different materials and works of different diameter, lathes must be run at differ-ent speeds. The gear box contained in the headstock makes it possible to run the lathe at various speeds. Before turning a work in the lathe, the lathe centers are to be aligned, that means that the axes of both centers must be on one line. The alignment of the lathe centers may be tested by taking a cut and then measuring both ends of the cut with a micrometer. Not all works should be fastened between the two centers of the lathe. A short work may be turned without using the dead center, by simply chucking it properly at the spindle of the head- stock. Задание 2: Поставьте глаголы, данные в скобках в правильную форму (предложения записывать полностью): 1.The lathe (to perform) many operations. 2.Almost all lathes (to have) a bed. 3.The headstock (to contain) a spindle. 4.A work piece (to be clamped) in a three- or four-jaw chuck, which (to mount) directly to the spindle. 5.In a metalworking lathe, metal (to be removed) from the work piece using a hardened cutting tool. 6.Cutting tools (to come) in a wide range of sizes and shapes.
- Предмет:
  Английский язык
- Автор:
  harrison35
- 2 года назад
- Ответов:
  
  1
- Смотреть
найдите середину отрезка с концами в точках А(2,4) и В(-6,2)
- Предмет:
  Математика
- Автор:
  cookie25
- 2 года назад
- Ответов:
  
  1
- Смотреть
К данным словам подберите однокоренные. Танец,сделать,подарок,букет, стекло, трогать, заколотить, летать, тихо, кормить, воровать, прятать,хватать
- Предмет:
  Русский язык
- Автор:
  levine
- 2 года назад
- Ответов:
  
  2
- Смотреть

2. Запишите синонимы к словам: Недалеко, здесь, со всех сторон, туда, далеко.​

Ответы 2

Топ пользователей

2. Запишите синонимы к словам: Недалеко, здесь, со всех сторон, туда, далеко.